Benzene, 1-fluoro-2,3-dimethyl-4-nitro-
3-FLUORO-6-NITRO-O-XYLENE
CAS: 1736-87-4
Molecular Formula: C8H8FNO2
Benzene, 1-fluoro-2,3-dimethyl-4-nitro- - Names and Identifiers
Benzene, 1-fluoro-2,3-dimethyl-4-nitro- - Physico-chemical Properties
| Molecular Formula | C8H8FNO2 |
| Molar Mass | 169.15 |
| Density | 1.225±0.06 g/cm3(Predicted) |
| Melting Point | 39-42℃ |
| Boling Point | 110°C/14mmHg(lit.) |
| Flash Point | >110°(230°F) |
| Vapor Presure | 0.0346mmHg at 25°C |
| Appearance | Crystallization |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.527 |
| MDL | MFCD05663712 |
Benzene, 1-fluoro-2,3-dimethyl-4-nitro- - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Hazard Note | Irritant |
| Hazard Class | 6.1 |
Benzene, 1-fluoro-2,3-dimethyl-4-nitro- - Introduction
It is an organic compound with the chemical formula C8H8FNO2. The following is an introduction to the properties and uses of the compound:
Nature:
-Appearance: Colorless crystal or light yellow solid.
-Boiling point: About 220-225 ° C.
-Melting point: About 76-77 ° C.
-Density: About 1.38g/cm³.
-Solubility: Easily soluble in organic solvents such as ethanol, acetone and dichloromethane, not easily soluble in water.
Use:
-Industrial applications: It is often used as an intermediate in organic synthesis, especially in the field of pharmaceutical and pesticide manufacturing.
-Pesticides: This compound can be used to synthesize certain pesticides and herbicides.
-Medicine: It is also used as a synthetic intermediate for certain drugs, including certain antibiotics.
Method:
The preparation method can be carried out by the following steps:
-First, 3-fluoro-1, 2-dimethylbenzene and nitric acid are reacted. Reaction conditions may require temperature control and the presence of a catalyst.
-Next, under appropriate conditions, the intermediate product is hydrogenated to obtain the final product.
Safety Information:
-Since it is a chemical substance, you need to pay attention to safety when using and handling it.
-Specific safety information and precautions should be determined by relying on specific safety data sheets and operating instructions.
-The compound may cause irritation to the skin, eyes and respiratory tract, so it is necessary to take appropriate protective measures when handling, such as wearing protective gloves, face shield and goggles.
-When storing, keep the compound in a dry, cool, well-ventilated place, away from fire and oxidizing agents.
-If necessary, refer to the local chemical management department for more safety information about the compound.
Nature:
-Appearance: Colorless crystal or light yellow solid.
-Boiling point: About 220-225 ° C.
-Melting point: About 76-77 ° C.
-Density: About 1.38g/cm³.
-Solubility: Easily soluble in organic solvents such as ethanol, acetone and dichloromethane, not easily soluble in water.
Use:
-Industrial applications: It is often used as an intermediate in organic synthesis, especially in the field of pharmaceutical and pesticide manufacturing.
-Pesticides: This compound can be used to synthesize certain pesticides and herbicides.
-Medicine: It is also used as a synthetic intermediate for certain drugs, including certain antibiotics.
Method:
The preparation method can be carried out by the following steps:
-First, 3-fluoro-1, 2-dimethylbenzene and nitric acid are reacted. Reaction conditions may require temperature control and the presence of a catalyst.
-Next, under appropriate conditions, the intermediate product is hydrogenated to obtain the final product.
Safety Information:
-Since it is a chemical substance, you need to pay attention to safety when using and handling it.
-Specific safety information and precautions should be determined by relying on specific safety data sheets and operating instructions.
-The compound may cause irritation to the skin, eyes and respiratory tract, so it is necessary to take appropriate protective measures when handling, such as wearing protective gloves, face shield and goggles.
-When storing, keep the compound in a dry, cool, well-ventilated place, away from fire and oxidizing agents.
-If necessary, refer to the local chemical management department for more safety information about the compound.
Last Update：2024-04-09 21:01:54
Supplier List
Product Name: 3-Fluoro-6-Nitro-O-Xylene Visit Supplier Webpage Request for quotation
CAS: 1736-87-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 1736-87-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 3-Fluoro-6-Nitro-O-Xylene Visit Supplier Webpage Request for quotation
CAS: 1736-87-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 1736-87-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History